Guide
Camera Shows Offline in Sikocam: What to Check
A Sikocam camera marked offline is usually power, range or a sleepy router. This routine finds which one in about five minutes.
CONTENTS On this page
Offline in the list does not mean broken. It means the app knocked and nobody answered. On cameras managed through Sikocam APK download, three causes cover nearly every case, and each has a two minute test.
Power, range, router
Start at the camera: is its light on, and is the power lead seated? Adapters worked loose by cleaning and pets are a classic. Next, range: has anything moved, a router shifted, a metal door added, a neighbour's network crowding yours? Last, the router itself: restart it, wait until it is fully up, then restart the camera.
Keep going with connection fixes from the start once this part is done; the two steps belong together in practice.
Read the pattern, not the panic
Offline at the same hour daily points at a timer, a switched socket or a router that reboots on schedule. Offline only in bad weather points outdoors, at a connection or a flooded mount. Offline after you changed anything on the network points at that change. The pattern is the diagnosis; the fix follows from it.
Related help: setting up camera WiFi properly covers the other half of this job.
When it keeps happening
A camera that drops weekly needs a change, not another restart: a better position, a stronger signal path, or a checked power supply. Log the times in the app alert history for a few days and the pattern usually names the culprit itself.
Quick Answers
The camera is offline but recording. Is that possible?
Yes. A camera can record to its card while its network link is down; playback returns when the link does.
Will an offline camera reconnect by itself?
Usually, once power and network return. If it stays offline after both are healthy, power cycle the camera.
Does offline mean someone unplugged it?
Not necessarily, but check the camera in person if the timing worries you; the last recording before it dropped is in playback.
How do I stop it happening?
Steady power, a socket nobody switches, and a signal path with fewer walls solve the repeat cases.