Guide
Sikocam WiFi Setup: The 2.4 GHz Question, Answered
Why cameras pair on 2.4 GHz, how to find that network name on your router, and how to place everything so the link stays up.
CONTENTS On this page
Almost every pairing problem is a WiFi problem wearing a disguise. Cameras that join through Sikocam APK follow the same rule as most home cameras: they pair on the 2.4 GHz band. This page explains why, and how to set the network up once, properly.
Why cameras use 2.4 GHz
The 2.4 GHz band travels farther and passes walls better than 5 GHz, and a camera sipping a video stream does not need the faster band's speed. It needs reach. That is why pairing asks for the 2.4 GHz network name even though your phone prefers 5 GHz for everything else.
Keep going with pairing on the right network once this part is done; the two steps belong together in practice.
Finding your 2.4 GHz network
Many routers show two names, often with the band in the name. If yours shows one combined name, the router usually steers devices itself; pairing still works in most cases, and standing near the router during pairing helps the camera land on the right band. Router settings also let you split the names if you want full control.
Related help: when the link still drops covers the other half of this job.
Placement that keeps the link honest
Count walls between router and camera, not metres. Two stud walls are fine; add a brick wall and a metal door and even a near camera struggles. If a camera must live far from the router, wired backhaul or a mesh point near its side of the house pays for itself in offline alerts that never happen.
Quick Answers
My phone will not stay on 2.4 GHz. What do I do?
You only need the phone on that network during pairing. Connect, pair, then let the phone return to its usual network.
Can I change the camera WiFi later?
Yes. Run the network or pairing settings for that camera in the app while it is still on the old network, or pair fresh on the new one.
Does a guest network work for cameras?
It can, but some guest networks isolate devices. A normal home network is the simpler home for a camera.
Will a WiFi extender help?
If the camera keeps its connection through it, yes. Place the extender halfway, not beside the struggling camera.